User instruction
Cleaner for water systems
PRO 01 is a modern and effective cleaning agent that is suitable for water systems. The product is odourless and the residual product is water and oxygen.
Dose PRO 01
Open the PRO 01 bag at the mark and pour the entire contents of the bag into the dosing bottle.
Fill the bottle with water
Then fill the dosing bottle to the mark on the bottle (approx. 3dl) with warm tap water,
about 45°C.
Screw on the lid
Screw on the lid and close the opening.
Shake and use
Shake the bottle for about 60 seconds or until the granules dissolve.
The cleaning agent is now ready to use.
The solution creates an overpressure in the bottle. Therefore, open the cap of the bottle while preparing the cleaning process.
If there are granules left at the bottom of the bottle, you can screw on the cork and shake a little more. It does not matter, however, if some grains of granules are carried down into the flush filter.
Good to know
This is how you know that the cleaning has reached the crane pillar
Turn on the water supply and flush for about 5-10 seconds, when you hear a puff of air from the faucet column, the system has been filled with cleaning agent.
Effective & simple
Safe & durable
Buy PRO01 from your dealer
PRO01 is sold through Escowa, www.escowa.se.